Monday, April 1, 2013

REVIEW: Hasbro AVENGERS Captain America


Released 2012 

Hasbro releases a Cap figure worthy of THE AVENGERS


   I've said it before and I'll say it again: Hasbro has come a long way since taking over the Marvel License from Toy Biz.  This doesn't mean that their figures are perfect though, and many fans still debate which company did Marvel more justice.
From the package to the review
 By 2012, Hasbro had relaunched MARVEL LEGENDS as well as making headway with their Thor and Iron Man (1&2) movie lines.  So by the time that THE AVENGERS hit, they were ready to drop some pretty nice figures to go with it (Why they never released a 6" AVENGERS Black Widow figure is still beyond me, though).  

  Some of these were just figures they had released for Thor and Iron Man 2 with minor revisions, which is disappointing.  These included a "Battle Damaged" repaint of their Iron Man 2 Mark VI (they never released the Mark VII), Nick Fury, their Thor figure with a new helmet-free head sculpt.
Package rear view
  Beyond these cash in's though, came some nice new figures like a Jeremy Renner based Hawkeye, a really impressive Hulk and the Avengers style Captain America figure reviewed here.


SCALE and HEIGHT

Captain America: A bit taller than the average
This figure clocks in at just over 6 inches, making him slightly taller than some of the other Avengers figures.  It fits more closely with Hasbro MARVEL LEGENDS figures than the older Toy Biz figures.  But it's close enough to not really matter.

 I wouldn't recommend it to be used with the larger scale MARVEL SELECT figures since they are in a 7 inch scale.


Sculpt

Likeness FAIL
Hasbro's sculpting team had hit their stride prior to the release of this line and comes up short in only one area: Likeness.  Facially, this figure looks generic, bearing no real resemblance to Chris Evans.  That caught me a bit by surprise considering how DEAD ON their Nick Fury and Hawkeye figures came out.  So if that's important to you, your only real option is moving WAY up the spectrum to either NECA's 18" Inch CAP or a HOT TOYS Cap.  But both of those are in an entirely different league of product.
Good Sculpting overall
  That said, Hasbro's figure is film accurate both proportionally and when it comes to detail (if not, the paint apps).  
Nice Material Detail
Materials are rendered to a fine level of detail and bits like the "A" on his head are sculpted rather than just being stenciled.  Boots feature a nice tread pattern around the edge (though not underneath) and buckles can be found on the boots and the gloves.  Also a nice (if unnecessary, thanks to the lack of a waist joint) touch, is caps belt... which is a separate piece that sits as it's own layer.   This is respectable work and holds up under close examination.
Rear View
  Quality Control here has also improved.  Gone are the chunks of plastic literally RIPPED out of the sculpt by rough removal from the mold.  That problem plagued some of their other figures as recently as Iron Man 2 (2010).  Hasbro was improving their mass market production pipeline, and it showed.  
  

Paint Apps 

  If modern movie based Hasbro figures have a shortcoming, it's their paint apps.  They just aren't up to the spec you see on their MARVEL LEGENDS line.  And this isn't to say that they are let down by sloppy work or poor execution, because that's simply not the case.  
Flat Colors are used without shading or dry brushing :(
  What lets these figures down is a decision on Hasbro's part to save money: they use only flat colors to block out the different areas of the figure.  You simply won't find shading of any kind on this figure...ANYWHERE.  And that's a shame.  

  Another thing you WON'T find is dry brushing, which can be used to great effect when done well.  Whether Hasbro was going for a "squeaky clean" look or just "squeaky cheap", the end result is the same: No love on the dry brushing front.  Unfortunate.  

  The broad strokes of color are pretty good.  Cap is Red, White and Blue where you'd expect him to be and that's a good thing.  
Silver Trim helps break up otherwise dull Paint Apps
And metallic silver accents can be found here and there to add a bit of shimmer to what otherwise is pretty dull.  The "A" painted on his head doesn't line up with the sculpted "A" which kind of sucks, but his "wings" came out better. 

  Application is cleaner than previous Hasbro efforts with paint bleed only found when closely inspecting the figure. And the paint is applied with enough thickness to avoid the plastic underneath coming through.


  The color used for Caps skin looks a bit plastic and his eyes seem to have the bare minimum amount of effort put into them.  They don't have that "white dot" meant to pass for a reflective highlight.  This undermines any sense of "life" in the eyes.

  And finally, his shield is basic but well done, being molded from red, semi-metallic finish plastic, then painted with Blue and Silver where needed.


Articulation   

  If this figure is a bit weak on the Paint Apps, it tries to make up for this with excellent Articulation.  And except for one thing, it succeeds.
Try THAT, Hulk!
This time out, Hasbro's figure includes not only numerous points of articulation, but a very impressive range of motion for each joint.  This really is the key to a well articulated figure, and they seem to get it.

  The one thing keeping Avengers Cap from being a home run here is than damned legacy issue, held over from the Iron Man Movie line.
MISSING IN ACTION: Waist Joint
 AGAIN we have a Hasbro movie based figure with NO WAIST joint.  This is just ludicrous.  Say what you will about it interfering with the beautiful sculpt, but I'll make that trade any day.  It works GREAT on Hasbro's HEROIC AGE Iron Man, and there is no excuse for it to be missing here.  This has got to be a cost cutting measure.  I just can't imagine any other reason for the exclusion of this joint.  Fix this, and you're golden, Hasbro.
Captain POSTURE: Leaning ALL the way back
  Instead you get not an ab crunch but another damned diaphragm pivot joint.  This is the ONLY way to get Cap's shoulders to rotate off axis from the waist.   This joint pulls double duty by accounting for all bending motion. Backward bending is MUCH improved from previous figures, but you can pretty much forget about bending Cap forwards.  Apparently, he is "The Posture King".
Ready to salute
  The head is mounted atop a ball hinge joint, with a really nice Range of Motion.    As you'd expect, his head does rotate left and right as well as supporting looking very far up, if not too far down.
Impressive shoulder joints
His shoulders rotate and raise just like most MARVEL LEGENDS do, but raise up about 15-20 degrees farther than most other figures in this scale.
Not many figures can reach this far back
Biceps swivel nicely and elbows are double jointed, with a range of motion so great that cap can nearly reach the back of his head.  IM-pressive.

  Cleverly hidden at the glove line are wrist swivels, but you won't find ANY ability to flex or extend Cap's wrists (via a pivot).  Normally, this would frustrate me, but since most collectors will attach Ol' Steve's shield to his forearm, this doesn't feel like as much of an issue.  Then again, maybe you'd prefer to run his shield on his back and pop a pistol in his hand ala "The First Avenger"... and in that case, your options are a bit more limited than they need to be.

  Both hands are pre-posed into semi-open positions.  So if you were hoping for trigger hands, you'll need to look elsewhere.
PUNT!
  Hip joints are ball hinges connected at a "T" intersection.  This means the legs are prone to move together, though this can be easily overcome.  His legs can move forward (dorsiflexion) into one hell of a goal kick, so expect a full 90+ degrees of freedom here, and he can even bust the splits sideways.  Hip joints that allow for this should be standard issue on ALL Hasbro Movie and LEGENDS figures moving forward.  Top it off with upper thigh swivels and the possibilities really open up.  Just great stuff.
Joints like this should be standard issue for Hasbro
  Knees are double jointed and collapse all the way down, only being limited by their own dimensions.  And while feet can't be rotated via shin/calf swivel, this is made irrelevant thanks to those upper thigh joints. 
ROCKING out
 I've found rotation to be far less useful than Ankle ROCKERS anyway, which this figure features.  This is Hasbro's NEW Rocker design as well, which has a crazy range of motion.  The only drawback is that they get loose quick.  Already, one of mine is a bit loose, and I *just* took this figure out of the package.  If these ratcheted, it might help.

What this all equates to is a damned impressive figure when it comes to pose-ability, and half the fun of owning a figure is trying out new poses for your display.


Special Features

  Thankfully, Hasbro didn't waste money on stupid "Action Features", preferring to spend their budget on getting the highest quality possible.
Foot Peg Holes lend useful support
  One of those quality features that I always seem to call out are Foot Peg Holes, and FINALLY Hasbro seems to be listening to the fans on this.  With the weak ankle Rockers, having a bit of extra support from the included stand can only help.


Accessories 

  This figure is pretty spartan when it comes to accessories.  He includes two.
Hasbro Modular Stand with AVENGERS branding
  The first is one of Hasbro's modular stands.  Nice to have, but not an outright necessity.
A bit on the small side
  The second is Captain America's Iconic Vibranium Shield.  And I have a bit of a love/hate relationship with it: Not because it's a little on the small side, scale wise.  I can look beyond that.  But it's the STRAPS that are a bit maddening.
Messy Straps
  The idea is great on paper:  Make it so the shield can be worn on either Cap's arm OR on his back.  Sounds good.  But this is accomplished via two long plastic straps that you have wrap into a loop two times (each) if you want to affix the shield to his arm. Since the Straps are plastic, they easily fold over on them selves and get generally mangled when doing this.  It's do-able, but kind of a pain in the ass.


Other versions

To my knowledge, Hasbro produced no Variant of this figure.  Figma is rumored to be producing Avenger's figures, but those are said to be in a different scale.


Size Comparison


A bit taller than Spidey
I've shown Cap next to Hasbro's own Symbiote Spiderman Figure.


Opinion, Value and VERDICT 

My money is on Captain Britain
Hasbro is providing pretty great Value for money with their figures these days.  Since you won't find these at retail anymore, trades or ebay are probably your cheapest path to ownership.  Currently one can be yours in the package for about $20 and that ain't bad.  

    Closing thoughts


    "When Captain America throws his mighty SHIEEEEEEELD!"

    Avenger's fans should be all over this.  

      For more REVIEWS like this one, keep checking back on yer' old pal Evotaph and GEEKISH PURSUITS.  In the meantime, please COMMENT and SUBSCRIBE!

    Wednesday, March 27, 2013

    REVIEW: Toy Biz MARVEL LEGENDS "Face Off" Hulk



    Released 2006 

    Toy Biz SMASHES their earlier efforts with this Incredible HULK figure!

    Hulk Airlines

    Any collector will tell you, there have been a LOT of Hulk Figures produced since big green saw his debut in May of 1962.  And truth be told, most of those efforts have produced less than stellar results.  But the bulk of these have seen release in recent years as demand for the big guy has steadily grown.

      It's not hard to imagine why the quality of these efforts has been so varied.  While "Huge Green dude" has remained a constant, the DETAILS of the Hulk's design has changed pretty drastically since the 60's.  Part of this is due to the ever evolving skill of the artists involved but an equal amount can probably be attributed to improvements in how toys themselves are made.  We've come a long way.  And by 2002, Toy Biz was going to finally get to take their shot at bringing this beloved character to life via plastic and paint.  Wisely, the Hulk was to be a cornerstone of their brand new MARVEL LEGENDS line of figures... a line that has seen an explosive burst of popularity (amongst comic book fans and collectors at least) in the years since.

    CANNONBALL!
      But even Toy Biz had to start somewhere.  And by comparison to their latter day efforts, early Marvel Legends figures still had plenty of room for improvement.  2002 doesn't really feel like that long ago to me, but what a difference four years can make.  That series 1 Hulk was by no means a bad figure, but it wasn't until 2006 that Toy Biz would give us their definitive Hulk Figure as part of their FACE OFF series of two-packs.  And it's that Hulk, that I'm here to review now. 

    SCALE and HEIGHT


    There's a punchline here about "8 Inches" but I'm leaving it alone.
    Face Off Hulk is not the biggest Hulk figure ever produced, but it is one of the bigger figures released in the MARVEL LEGENDS 6 inch scale.  All told, he clocks in at just over 8 inches... enough to make most Legends look small (as they should) by comparison.  He fits in well with Hasbro and Toy Biz MARVEL LEGENDS figures.

     I wouldn't recommend it to be used with the larger scale MARVEL SELECT figures since they are in a 7 inch scale.  You could probably get away with it, but might be better served using the Marvel SELECT Hulk from THE AVENGERS (released 2012).


    Sculpt

      In my opinion, the Sculpt is one of this figures greatest strengths.  To be sure, this Hulk is a bit of a time capsule.  Stylistically, he's very much in keeping with the best elements of the Hulk as he appeared in the 1980's.  THIS is the Hulk that reigned alongside the mullet, "The Gipper", BEAT STREET and bandanas wrapped around thighs! It's a very different take on the Hulk than what we see in THE AVENGERS (2012), and that is a good thing (Not that modern Hulk is any less awesome, but I'm all for variety).
    A Fantastic Sculpt
     There has been a tendency in other Hulk figures to make them look like EVERY muscle in his entire body is fully flexed at the same time, which is not only impossible, but looks a bit ridiculous.  What I admire here is a sense of realism based restraint in the sculpting.  He still looks massive and powerful, but is not all roid-raged out.  There's almost a look of repose to his physique... the potential for all that power to be released.
    Rear view
      You won't find labyrinthine tangles of meaningless (and usually inaccurate) veins or muscles that look like they are about to snap for no reason.  The veins that are there are anatomically accurate and understated.  Hulk's feet are giant (which helps with stability) and his hands are rendered with muscular realism rather than just making his fingers look like fat sausages.
    Bob Larkin's classic painting
      And his face... is EPIC, with a wide eyed expression ripped straight from the artwork of Bob Larkin's classic painting (which was used by Marvel's Marketing for years).  Teeth are over-sized, and his hair is messy and disheveled.  The modern Hulk has a much more clean cut hair style and more realistically sized teeth.  More human, less monster.  And I like my monsters.  Face Off Hulk just looks MEANER... scrappier, and more raw.  

    The sculpt is otherwise clean.  I didn't spot any messy mold seams or chunks of missing plastic where the figure had been ripped away from the sprues.

      His skin has an almost elephant hide look to parts of it, with well placed wrinkles to seal the deal.  And his pants have an almost burlap feel to them.  This is some quality work, especially when you consider the price point that this figure was released at.

      

    Paint Apps 

    I know I keep coming back to this, but Toy Biz just seemed to put more "love" into their paint apps than Hasbro does.  For example, you'll find a layer of paint shading over the entire figure along with targeted use of washes to accent certain details.  You just don't see that from Hasbro.

    The Face Off Hulk's skin is more of an emerald green than the warm green used for Modern Hulk and shading adds depth to the musculature.  This is more prevalent in the upper torso though, than the ankles and feet.  And fans of the original comics will appreciate Face Off Hulk sporting a snazzy pair of shredded PURPLE pants!  These have been given a wash to deepen the texture, which is a nice effect.
    Ready for his close up
    A lot of effort has gone into the paint apps used on the head as well.  Rather than just being black, his hair has been given a deep green wash for variety and unlike any other Hulk figure I've seen, the iris's of his eyes POP with an eerie off white color.  It reminds me of the contacts worn by Lou Ferrigno on the old 80's TV show.  Teeth have a brown-yellow wash over them... one more gritty detail unheard of in this era of blinding bleached teeth.

      Paint work overall is thick so none of the underlying plastic color bleeds through, and there are no discernible scuffs to be found.  Edges are crisp and there is no unwanted paint bleed anywhere.  Like the sculpting, the paint apps scream quality.  It's no surprise that this figure is so highly regarded in collectors circles.



    Articulation   

      One area where you might expect this figure to fall a bit short is when it comes to the Articulation.  And there you'd be right.  This is not the most articulated figure in the world.  But then, we're not talking spiderman here, so I didn't expect to be able to twist the big guy into Yoga poses.

      It's surprising how many points of articulation the Face Off Hulk actually DOES have.  What undermines his articulation is the range of motion of each individual joint.  So what can you expect from big green?
    Now THOSE are some huge Traps
      Well for starters, the head is mounted atop what I can only guess (you can't see it) is a ball-hinge joint.  This allows the Hulkster to look left and right as well as pretty far down... but not up.  That direction is wholly blocked by his massively over-sized trapezius muscle.

    Possibly the only outright oversight on the figure is the lack of any kind of torso articulation.  There is no diaphragm pivot joint or ab-crunch to be found here.  I can understand the decision, since including such a joint would detract from the beautiful sculpt... but personally, I'd sacrifice that to get extra articulation.  What perfection this figure would be, with an Ab-crunch and a wider range of motion to existing joints.  So Face Off Hulk 100% cannot bend forward.  Bummer.
    Waist Swivel of Justice
      Instead you get a waist swivel joint.  And that's more than Hasbro's Iron Man Figures can say so I'm glad to see it.

      His shoulders rotate and raise just like most MARVEL LEGENDS do, however this is again limited by his massive physique.  This time the limiting factor is purely his bulk.  Still, what's here is serviceable.
    Limited Range of Motion
      Biceps swivel as you'd expect.   As for the elbows, those are single jointed and feature less than 90 degrees of play.  It wouldn't be until 2012 when we'd see a Hulk figure with double jointed elbows (Walmart exclusive AVENGERS Hulk).
    Hulk SMAS... er, Slap..
      Finishing out the upper body articulation are wrists that swivel and pivot (which is awesome) and hands that feature the tried and true Toy Biz hand articulation.  This isn't on an individual finger basis, but the four fingers  on a hinge paired to a thumb that doesn't move.  Usually, this is a pretty useful set up, but in the case of Face Off Hulk, articulation is sacrificed again on the altar of sculpting.  Fingers are pre-posed into what are basically flat open palms.  These are better for slapping than punching, and folding them into approximations of fists, just doesn't really work.  A noticeable shortcoming in an otherwise excellent figure, and one that pretty seriously limits your options.
    About as much motion as you can squeeze out of these joints
      His lower body articulation is similarly limited by his mass.  Hip joints are standard Toy Biz fare... Ball-Hinge joints.  In their default position his legs can be raised to the side and forward (dorsiflexion) albeit by a very limited number of degrees.  This is made a bit less cumbersome by the addition of upper thigh swivels.  Knees are single jointed and suffer the same limited range of motion.
    Toy Biz's early ANKLE ROCKER design
    Ankles and feet joints were ahead of their time in terms of functionality though the joints themselves aren't as integrated as modern designs.  Each axis of movement sported an independent joint and these worked together towards the over all motion.  His feet don't rotate (the hip swivels allow this by extension) but they do pivot vertically AND support camber adjustment (for that wide heroic stance) via an early ANKLE ROCKER design.  And there are even toe joints.  

      So it's a solid effort overall.  Not groundbreaking, but good enough to meet the expectations most collectors will have of a big ass HULK figure.



    Special Features


    Unlike modern Hasbro Legends, Toy Biz often rocked a hole in the figure's back that allowed you to get it up into the air with a flight stand.  While some say that Face Off Hulk is too beefy to allow this, Shartimus Prime (look up his excellent reviews on Youtube) proved that this can be done with a little creativity.
    Make sure to use a solid flight stand with this
      Of course, when I tried to be cool like him, my (used) flight stand peg snapped off in his back... grounding my dreams of a green airborne meat missile.  So I had to fall back on a heavy duty aftermarket stand to get the big guy aloft.
    Toy Biz going the extra mile
      And I have to give it to Toy Biz again for going the extra mile.  Face off Hulk features Foot Peg holes.


    Accessories 

      Had I bought this figure new, he would have come with a two-figure flight stand and diorama card to insert into it.  He also would have come with a less than amazing figure of THE LEADER.  But all I was after was the Hulk himself, so I bought him loose via eBay.

    Other versions

    Open Mouth Variant
      The Face Off Hulk has an open mouth variant (different head sculpt).  The included LEADER figure has an entirely new head as well.  Otherwise, the Variant is identical to the base figure(s).


    Size Comparison

    Making Spidey look small
      For the sake of continuity I've shown the Hulk here next to Hasbro's Symbiote Black Spiderman.

    Next to Hasbro's excellent AVENGERS HULK
    As a Bonus, I snapped another shot of Face Off Hulk next to the Walmart exclusive AVENGERS Hulk figure.  Please note that AVENGERS Hulk has a wide default stance making him look slightly shorter, but both figures are actually about the same height.


    Opinion, Value and VERDICT 

    With the MARVEL SELECT She-Hulk
      This is a harder figure to come by these days.  Be it the superb sculpt, lovingly applied paint apps or decent articulation, it's one of, if not THE best Legends scale Hulk figure going.  Even used (without the LEADER or accessories) this guy can set you back close to $50 on ebay.  A shiny new two-pack runs closer to $80.  So this is not a casual purchase.  But collectors will likely find the Face Off Hulk an irresistible addition to their collection.

      For everybody else though, you could get just as much figure for a lot less money by picking up a Walmart Exclusive AVENGERS HULK figure (review forthcoming).  It's got a great sculpt, and superior articulation, if not the loving paint apps.

      Closing thoughts



        Still the best Hulk Figure for your Legends Collection.  Just not the best VALUE.

        For more REVIEWS like this one, keep checking back on yer' old pal Evotaph and GEEKISH PURSUITS.  In the meantime, please COMMENT and SUBSCRIBE!

      Monday, March 25, 2013

      REVIEW: Hasbro War Machine

      Released 2009-2010 


      Hasbro makes huge improvements to their Iron Man line

      Front View
         If you read my reviews of Hasbro's Mark II and III figures then you know that they were full of suck.  A sub-par sculpt, sloppy paint apps, useless articulation and horrid quality control undermined the vast potential of those figures to kick ass.
      Rear View
        So you can imagine that I didn't have very high expectations coming into Hasbro's Iron Man 2 figure line.  And maybe that's why I've been so pleasantly surprised.  While far from perfect, Hasbro made some serious strides with some of the figures in this line... WAR MACHINE being the best of them.  Here's why: 

      SCALE and HEIGHT

      Six inches of fun
      This is an approximately 6 inch figure, and corrects the slight "shortness issue" found in the Mark II-III.  It fits more closely with Hasbro MARVEL LEGENDS figures than the older Toy Biz figures.  But it's close enough to not really matter.

       I wouldn't recommend it to be used with the larger scale MARVEL SELECT figures since they are in a 7 inch scale.


      Sculpt

      Sharp Detail in the Sculpt
      By the time that this figure was released, Hasbro had really upped their game when it came to sculpting.  Finally, we had an Iron Man movie figure with crisp, film accurate proportions and an eye for detail that was in striking range of even Kaiyodo's superb Revoltech line.  More impressive was this level of detail at a fraction of the cost.  This is impressive work by any standard and holds up under close examination.
      Sculpt Detail even extends to hidden areas.  Nice work!
        War Machine bristles with weaponry and Tank-like armor plating, all of which is faithfully recreated.  The "pinched" look of the Mark II-III helmets has been fixed and substructure detail can even be found INSIDE the armored knee joints.  Lesser figures would have cut corners here, and Hasbro should be applauded for not cheaping out.
      Where's the Love, Hasbro?
        The only real shortcoming can again be laid at the feet of Hasbro's Quality Control.  There are spots all over the figure that have had chunks of plastic literally RIPPED out of the sculpt by rough removal of the figure from the sprues of the mold.  This speaks to the mass market nature of Hasbro's production pipeline.  Kids won't care, but collectors might be disappointed in how their figures took abuse during assembly.
        

      Paint Apps 

      Here too War Machine impresses.  The broad strokes of color are spot on with a deep semi-matte finish grey that includes tiny flecks of metallic in the plastic itself.  The result is a surface that picks up the highlights around it nicely without looking too shiny or like plastic.

        Silver accents can be found throughout, and are crisp.  There is almost zero paint bleed to be found (even in hidden areas like under the knee armor).  And the paint is applied with enough thickness to avoid the plastic underneath coming through.
      Looking Good
        The eyes and Arc Reactor are rendered in white with a red painted outline to give the effect of a glow.  The result is well done and effective.

        But what impressed me the most were the tiny details that most people would have overlooked.  Some of these details are even absent on the MARVEL SELECT War Machine, and Marvel Select are known for their impressive paint apps (if not their limited articulation).
      Stencil Markings
        It's really cool to see the stencil style markings all over War Machine.  Markings like "AF57" might hint at an Air Force division and "001" probably denotes that War Machine is the first military effort at this kind of tech.  It's fertile ground for the imagination... and isn't that part of what appeals to us about comics and toys in the first place?
      WARNING!
        You'll even find tiny yellow and black "WARNING" style striping on the rear end of War Machine's forearm guns.  Hasbro, certainly went the extra mile here, and it shows all over this figure.


      Articulation   

        It's clear that Hasbro made an effort to improve the articulation on War Machine beyond what had been done for the Mark II-III but the bulkiness of the armor does limit his movement a bit.  He's not quite up to Marvel Legends spec due to a few legacy issues, but what is here gets the job done.
      Articulation gets the job done, but suffers legacy issues
      Again, it's not that the points of articulation are lacking, but that the range of motion of each joint is especially limited... some in ways that were avoidable.

        For example:  AGAIN we have a Hasbro movie based Iron Man figure with NO WAIST joint.  This is just ludicrous.  Say what you will about it interfering with the beautiful sculpt, but I'll make that trade any day.  It works GREAT on Hasbro's HEROIC AGE Iron Man, and there is no excuse for it to be missing here.
      What you get instead of a Waist Joint
        Instead you get not an ab crunch but another diaphragm rib pivot joint.  This is the ONLY way to get War Machine's shoulders to rotate off axis from the waist.  Backward bending and Forward bending are much improved and have a decent range of motion.
      Looking Down
        The head is mounted atop a ball hinge joint, that also includes a bit of toe to heel play.    As you'd expect, his head does rotate left and right.  Again, you can forget about that flight pose, but looking down is no problem.  Since War Machine is more of a ground level piece of firepower, I don't really miss the flight pose capability.
      Shoulder Armor done right
      His shoulders rotate and raise just like most MARVEL LEGENDS do and surprisingly his hinged shoulder armor doesn't get in the way.  That's no small feat.  Biceps swivel nicely and elbows are double jointed.
      Not bad for all that armor
        War Machine's wrists swivel and extend (via a pivot) far enough for that iconic Repulsor pose, with separately hinged hand armor that gets out of the way when needed.  This is a nice touch, though these pop off easily.
      Hand Armor is hinged.  Good call, Hasbro.
        Both hands are pre-posed in useful ways.  See the ACCESSORIES section below for details.
      Return of the wacky hip joints
        I continue to be mystified by Hasbro's bizarre choice of hip joints though.  In their default position his legs can't really be raised to the side OR move forward (dorsiflexion) without first rotating the hip joint by 90 degrees or so.  Even then, his leg motion has a slight arc to it and you have to use the upper thigh swivels to get his knee joint top side again.  I can't get my head around what they were thinking here.


        Knees are double jointed and work surprising well.

        Which brings us to the ankles and feet... which are a design hold over from earlier Iron Man movie figures.  Sure you can eek out a bit more vertical pivot from the ankles than before, but this isn't very useful.  Want some camber out of those feet to support a wide heroic stance?  Well forget about it.  But hey, the ankles allow the feet to ROTATE.... though even this is limited by the ankle armor.

      The end result is a bit of a mixed bag.  Likely "good enough", but not great.
      Kick ass
      I was surprised by one cool bit of articulation though: Mini-gun articulation!  And this just kicks ass.  By default the mini-gun is attached to the left side of War Machines back... but let's say you'd prefer it coming over the right side instead.  NO PROBLEM!  The turret arm is on a track which allows it to slide from left to right.  Add to this a vertical pivot and horizontal swivel and you have a gun that can be pointed pretty much anywhere you'd want it.  He's even got a rocket Launcher pod (over his right shoulder) on a Horizontal pivot.   So when it comes to weapons, you have some serious options.


      Special Features

      Now THAT's a gun!
        War Machine's most obvious special feature is a turreted mini-gun that includes a separate ammo belt (which is a nice touch).  This looks great and functions even better thanks to the articulation options described above.
      Missing Foot Peg Holes... Again
        There's just one thing keeping WM from being a home run here and it's the absence of Foot Peg Holes.  I know I harp on this a lot, but these should be standard issue on every Hasbro figure.  You'll find them on nearly all MARVEL LEGENDS figures and yet for some reason they've been consistently left off of the Iron Man Movie figures.  


      Accessories 

      No shortage of Accessories
        Another thing that surprised me with War Machine was that the figure wasn't an "either-or" proposition.  Previously (with Hasbro), you'd get a crap figure with accessories OR and nice figure with no useful accessories.
      Fists
        In the case of War Machine, you get a very nice figure AND some very nice accessories.  For starters, you get 3 SETS of hands (6 total)!  That alone gets you a lot of possibilities.
      Partially Open Hands
        You'll find open "Repulsor Blast" hands, Partially Open Hands and Closed Fists.
      Rocket Pod and Ammo Belt
        And finally, he includes an accessory that you won't even find on either the Marvel Select OR Revoltech War Machine offerings... his rocket launcher pod!
      Rocket Pod cover
      This affixes to a hole over his right shoulder and should you decide you don't want to use it (or prefer the mini-gun to slide over to his right instead of left), there's even a little cover that you can plug into the hole.  GREAT WORK, Hasbro! 


      Other versions

        I'm not going to talk about HOT TOYS offering here since that is in the 1:6 scale and might cost you a kidney to get your hands on these days.

      But there are two other serious contenders in the space that Hasbro's offering occupies.
      Only a Revoltech can do this
       Japan's Kaiyodo produced a War Machine in their REVOLTECH line that looks VERY good.  It's got a sculpt that rivals Hasbro's, as well as very good paint and some great accessories.  It also DOMINATES Hasbro's figure when it comes to articulation.  So if you are into ACBA or just love getting your figures into the most dynamic pose possible, make yours a Revoltech.  Yes, it does cost about $55 so it's worth considering if you *need* all that poseability or if a Hasbro War Machine would take care of you.
      MARVEL SELECT (Left) and HASBRO (Right)
        The other option is a Marvel Select War Machine (from Diamond).  This is in a slightly larger 7" scale and is positioned as an affordable proposition to the "statue on my desk" audience.  While I don't personally own one (I own their Mark VI) it's clear that the sculpt is excellent.  This is also your only option if you want a figure with the helmet open.  But paint apps have been hit an miss with Marvel Select in the past.  When they get it right, it looks great... but then other times they do things like forget to paint the eyes.  What you WON'T get is articulation.  Range of motion has been extremely limited on a per joint basis in the past, and while their upcoming NIGHTCRAWLER figure gives me hope, War Machine was released prior to these improvements.  Expect a nice desk ornament, but not an action figure.   


      Size Comparison


      Maybe Bigger IS better after all
      I've shown War Machine next to the Mark III.  You can see that War Machine is bigger overall.


      Opinion, Value and VERDICT 

      Now all we need is 6" Hammer Drones
      For fans of the Iron Man films it would be hard to find a better value for money than Hasbro's War Machine figure.  Dollar for Dollar it's just a clear winner.

        Closing thoughts


        Weapons HOT!
          There are other War Machine Figures out there that fill their respective niches nicely, but you won't find a single figure that does as many things right for the money as Hasbro's War Machine.  Get one before they are gone. 

          For more REVIEWS like this one, keep checking back on yer' old pal Evotaph and GEEKISH PURSUITS.  In the meantime, please COMMENT and SUBSCRIBE!